Building Environment

Vibration Signatures for Three Positive Displacement Compressors


pdf icon Vibration Signatures for Three Positive Displacement Compressors (951 KB)

 

Yashar, D. A. and Payne, W. V.

NISTIR 7183

Keywords:

Compressor vibration

Abstract:

This report presents vibration data for three positive displacement compressors which will be used to evaluate Microelectromechanical Systems (MEMS) vibration sensors at a later time.  The axial, radial and tangential vibration signatures of three compressors were measured under different operating conditions.  An open-drive four cylinder compressor’s vibration signatures were measured at discharge pressures of 1724 kPa (250 psig) and 2413 kPa (350 psig), with three different drive frequencies.  A hermetic scroll compressor’s vibration signatures were measured at three drive frequencies with a discharge pressure of 1724 kPa (250 psig), and at one drive frequency with a discharge pressure of 2241 kPa (325 psig).  Finally a large, six-cylinder, chiller compressor’s vibration signatures were measured with two, four, and six of the cylinders engaged. 


Building and Fire Research Laboratory
National Institute of Standards and Technology
Gaithersburg, MD 20899

 


Graphic Rule

Privacy Policy / Security Notice / Accessibility  |  Disclaimer  |  FOIA

NIST is an agency of the U.S. Department of Commerce

BFRL Logo

Last updated: 4/21/2005