 |
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
|||||||
 |
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|||
Linear-Fit-Based Rating Procedure for Mixed Air-Source Unitary Air Conditioners and Heat Pumps Operating in the Cooling Mode
Linear-Fit-Based Rating Procedure for Mixed Air-Source Unitary Air Conditioners and Heat Pumps Operating in the Cooling Mode
W. Vance Payne and Piotr A. Domanski
NISTIR 7325
Abstract:
The purpose of this report is to establish the method for determining the cooling performance ratings of air-source unitary split system air conditioners and heat pumps consisting of an outdoor section and an indoor section that were not tested together as a complete system. The quantities calculated in this document are the cooling capacity at the A Test conditions and the SEER as prescribed by the U.S. Department of Energy in Appendix M to Subpart B of Part 430 within Title 10 of the Code of Federal Regulations (CFR 2006a and CFR 2006b) and by ARI Standard 210/240 (ARI 2006).
Keywords: Unitary Air Conditioners and Heat Pumps, Mixed Systems, Matched Systems, Linear Cooling Capacity, Linear Power, SEER, Capacity Correction.
Building and Fire Research Laboratory
National Institute of Standards and Technology
Gaithersburg, MD 20899
|
Privacy Policy / Security Notice / Accessibility Disclaimer | FOIA | Information Quality | About NIST NIST is an agency of the U.S. Department of Commerce
|
|
Last updated: 9/14/2006