NIST Multizone Modeling Website
  1. Ventilation in Manufactured Houses
  2. Ventilation, IAQ and Energy Impacts of Ventilation
  3. Energy Impacts of Infiltration and Ventilation in U.S. Office Buildings
  4. Modeling of Three Residential IAQ Control Options
  5. IAQ Impacts of Particle Air Cleaners in a Single-zone Building
  6. Radon Transport in Large Buildings
  7. IAQ Design
  8. Air Balance Analysis
  9. Smoke Management
  10. Hybrid Ventilation
  11. A Collection of Homes Representing U.S. Housing Stock
  12. Airflow and Indoor Air Quality Models of DOE Reference Commercial Buildings

References

Case Studies

References

Emmerich, S. J., A. K. Persily, et al. (1995).

A Work plan to Analyze the Energy Impacts of Envelope Air tightness in Office Buildings National Institute of Standards and Technology.

NISTIR 5758 [PDF].

Emmerich, S. J. and A. K. Persily (1996).

Multizone Modeling of Three Residential Indoor Air Quality Control Options National Institute of Standards and Technology.

NISTIR 5801 [PDF].

Emmerich, S. J. and A. K. Persily (1998).

Energy Impacts of Infiltration and Ventilation in U.S. Office Buildings Using Multizone Airflow Simulation IAQ and Energy 98, New Orleans, Louisiana, ASHRAE.

PB96-165782 [PDF]

Emmerich, S. J. and S. J. Nabinger (2000).

Measurement and Simulation of the IAQ Impact of Particle Air Cleaners in a Single-Zone Building National Institute of Standards and Technology.

NISTIR 6461 [PDF].

Eriksson, Jorgen; Asa Wahlstrom, Ph.D. (2002)

Use of Multizone Air Exchange Simulation to Evaluate a Hybrid Ventilation System ASHRAE Annual Meeting 2002

Fang, J. B. and A. K. Persily (1995).

Computer Simulations of Airflow and Radon Transport in Four Large Buildings National Institute of Standards and Technology.

NISTIR 5611 [PDF].

Ferriera, M. J. (1998).

Analysis of Smoke Control System Design Using a Computer-based Airflow Analysis Pacific Rim Conference and Second International Conference on Performance-Based Codes and Fire Safety Design Methods, Maui, Hawaii.

Ferriera, M. J. (2002).

Use of Multizone Modeling for High-Rise Smoke Control System Design 2002, ASHRAE Annual Meeting

Musser, A. (2000).

Multizone Modeling as an Indoor Air Quality Design Tool Proceedings of Healthy Buildings 2000, Espoo, Finland.

Musser 2000 [PDF].

Ng L.C., Musser A., Persily A.K., Emmerich S.J. (2012).

Airflow and Indoor Air Quality Models of DOE Reference Commercial Buildings

Tech Note 1734 - CONTAM reference bldgs [PDF].

Persily, A. K. (1998).

A Modeling Study of Ventilation, IAQ and Energy Impacts of Residential Mechanical Ventilation National Institute of Standards and Technology.

NISTIR 6162 [PDF].

Persily A. K. and S. R. Martin (2000).

A Modeling Study of Ventilation in Manufactured Houses National Institute of Standards and Technology.

NISTIR 6455 [PDF].

Persily A.K., Musser A., Leber D.(2006).

A Collection of Homes Representing U.S. Housing Stock.

NISTIR 7330 [PDF].